Marine-Grade Epoxy Resin

The YED 1096 SEMM Resin Patch Set is a class-approved, two-component epoxy repair system designed for emergency pipe and equipment repairs at sea. When welding or hot work is not an option, this kit allows crew members to carry out fast, reliable temporary repairs — keeping critical systems operational until the vessel reaches port. The system consists of a stabilizer-filled putty resin and hardener (810g + 140g), activated by simple mixing with a working time of approximately 30 minutes. Once cured, the repair withstands temperatures up to 180°C, pressure up to 30 bar, and delivers up to 10 years of UV resistance. The flexible, crack-resistant structure handles vibration without degrading — making it suitable not only as a repair solution but also as a high-performance protective coating and primer layer on high-stress components. Compatible with steel, cast iron, copper, stainless steel, ABS, polycarbonate, polyurethane, and selected composite surfaces. Applicable in wet and humid marine environments without surface drying.

• Seawater cooling lines
• Ballast systems
• Firefighting lines
• Corrosion-thinned pipe surfaces
• Pinhole leaks
• Small to medium cracks
• Insulation surfaces
• High-adhesion bonding requirements

• Class-approved by Phoenix Register of Shipping (valid until November 2030)
• Two-component stabilizer-filled epoxy formulation
• No welding or hot work required
• Temperature resistance up to 180°C
• Temporary pressure sealing up to 30 bar UV and sunlight resistance up to 10 years
• Flexible, crack-resistant structure — vibration proof Nanotechnology-enhanced formulation
• Non-toxic and non-flammable
• Can be drilled after 36 hours, full cure in 72 hours
• Shelf life up to 60 months 950g kit (810g resin + 140g hardener)